jest command line runner has a number of useful options. You can run
jest --help to view all available options. Many of the options shown below can also be used together to run tests exactly the way you want. Every one of Jest's Configuration options can also be specified through the CLI.
Here is a brief overview:
Run all tests (default):
Run only the tests that were specified with a pattern or filename:
Run tests related to changed files based on hg/git (uncommitted files):
Run tests related to
Run tests that match this spec name (match against the name in
Run watch mode:
Watch mode also enables to specify the name or path to a file to focus on a specific set of tests.
If you run Jest via
yarn test, you can pass the command line arguments directly as Jest arguments.
you can use:
If you run Jest via
npm test, you can still use the command line arguments by inserting a
npm test and the Jest arguments.
you can use:
Jest supports both camelcase and dashed arg formats. The following examples will have an equal result:
Arguments can also be mixed:
Note: CLI options take precedence over values from the Configuration.
--projects <path1> ... <pathN>
--selectProjects <project1> ... <projectN>
When you run
jest with an argument, that argument is treated as a regular expression to match against files in your project. It is possible to run test suites by providing a pattern. Only the files that the pattern matches will be picked up and executed. Depending on your terminal, you may need to quote this argument:
jest "my.*(complex)?pattern". On Windows, you will need to use
/ as a path separator or escape
-b. Exit the test suite immediately upon
n number of failing test suite. Defaults to
Whether to use the cache. Defaults to true. Disable the cache using
--no-cache. Note: the cache should only be disabled if you are experiencing caching related problems. On average, disabling the cache makes Jest at least two times slower.
If you want to inspect the cache, use
--showConfig and look at the
cacheDirectory value. If you need to clear the cache, use
Runs tests related to the current changes and the changes made in the last commit. Behaves similarly to
Runs tests related to the changes since the provided branch or commit hash. If the current branch has diverged from the given branch, then only changes made locally will be tested. Behaves similarly to
When this option is provided, Jest will assume it is running in a CI environment. This changes the behavior when a new snapshot is encountered. Instead of the regular behavior of storing a new snapshot automatically, it will fail the test and require Jest to be run with
Deletes the Jest cache directory and then exits without running tests. Will delete
cacheDirectory if the option is passed, or Jest's default cache directory. The default cache directory can be found by calling
jest --showConfig. Note: clearing the cache will reduce performance.
A glob pattern relative to
rootDir matching the files that coverage info needs to be collected from.
Forces test results output highlighting even if stdout is not a TTY.
-c. The path to a Jest config file specifying how to find and execute tests. If no
rootDir is set in the config, the directory containing the config file is assumed to be the
rootDir for the project. This can also be a JSON-encoded value which Jest will use as configuration.
--collectCoverage. Indicates that test coverage information should be collected and reported in the output. Optionally pass
<boolean> to override option set in configuration.
Indicates which provider should be used to instrument code for coverage. Allowed values are
babel (default) or
Note that using
v8 is considered experimental. This uses V8's builtin code coverage rather than one based on Babel. It is not as well tested, and it has also improved in the last few releases of Node. Using the latest versions of node (v14 at the time of this writing) will yield better results.
Print debugging info about your Jest config.
Attempt to collect and print open handles preventing Jest from exiting cleanly. Use this in cases where you need to use
--forceExit in order for Jest to exit to potentially track down the reason. This implies
--runInBand, making tests run serially. Implemented using
async_hooks. This option has a significant performance penalty and should only be used for debugging.
The test environment used for all tests. This can point to any file or node module. Examples:
Make calling deprecated APIs throw helpful error messages. Useful for easing the upgrade process.
-e. Use this flag to show full diffs and errors instead of a patch.
Find and run the tests that cover a space separated list of source files that were passed in as arguments. Useful for pre-commit hook integration to run the minimal amount of tests necessary. Can be used together with
--coverage to include a test coverage for the source files, no duplicate
--collectCoverageFrom arguments needed.
Force Jest to exit after all tests have completed running. This is useful when resources set up by test code cannot be adequately cleaned up. Note: This feature is an escape-hatch. If Jest doesn't exit at the end of a test run, it means external resources are still being held on to or timers are still pending in your code. It is advised to tear down external resources after each test to make sure Jest can shut down cleanly. You can use
--detectOpenHandles to help track it down.
Show the help information, similar to this page.
Generate a basic configuration file. Based on your project, Jest will ask you a few questions that will help to generate a
jest.config.js file with a short description for each option.
Insert Jest's globals (
beforeEach etc.) into the global environment. If you set this to
false, you should import from
Note: This option is only supported using
Prints the test results in JSON. This mode will send all other test output and user messages to stderr.
Write test results to a file when the
--json option is also specified. The returned JSON structure is documented in testResultsProcessor.
Run all tests affected by file changes in the last commit made. Behaves similarly to
Lists all tests as JSON that Jest will run given the arguments, and exits. This can be used together with
--findRelatedTests to know which tests Jest will run.
Logs the heap usage after every test. Useful to debug memory leaks. Use together with
--expose-gc in node.
Prevents Jest from executing more than the specified amount of tests at the same time. Only affects tests that use
-w. Specifies the maximum number of workers the worker-pool will spawn for running tests. In single run mode, this defaults to the number of the cores available on your machine minus one for the main thread. In watch mode, this defaults to half of the available cores on your machine to ensure Jest is unobtrusive and does not grind your machine to a halt. It may be useful to adjust this in resource limited environments like CIs but the defaults should be adequate for most use-cases.
For environments with variable CPUs available, you can use percentage based configuration:
Disables stack trace in test results output.
-o. Attempts to identify which tests to run based on which files have changed in the current repository. Only works if you're running tests in a git/hg repository at the moment and requires a static dependency graph (ie. no dynamic requires).
Allows the test suite to pass when no files are found.
--projects <path1> ... <pathN>#
Run tests from one or more projects, found in the specified paths; also takes path globs. This option is the CLI equivalent of the
projects configuration option. Note that if configuration files are found in the specified paths, all projects specified within those configuration files will be run.
Run tests with specified reporters. Reporter options are not available via CLI. Example with multiple reporters:
jest --reporters="default" --reporters="jest-junit"
A list of paths to directories that Jest should use to search for files in.
-i. Run all tests serially in the current process, rather than creating a worker pool of child processes that run tests. This can be useful for debugging.
--selectProjects <project1> ... <projectN>#
Run only the tests of the specified projects. Jest uses the attribute
displayName in the configuration to identify each project. If you use this option, you should provide a
displayName to all your projects.
Run only the tests that were specified with their exact paths.
Note: The default regex matching works fine on small runs, but becomes slow if provided with multiple patterns and/or against a lot of tests. This option replaces the regex matching logic and by that optimizes the time it takes Jest to filter specific test files
The path to a module that runs some code to configure or set up the testing framework before each test. Beware that files imported by the setup script will not be mocked during testing.
Print your Jest config and then exits.
Prevent tests from printing messages through the console.
-t. Run only tests with a name that matches the regex. For example, suppose you want to run only tests related to authorization which will have names like
"GET /api/posts with auth", then you can use
Note: The regex is matched against the full name, which is a combination of the test name and all its surrounding describe blocks.
location field to test results. Useful if you want to report the location of a test in a reporter.
column is 0-indexed while
line is not.
A regexp pattern string that is matched against all tests paths before executing the test. On Windows, you will need to use
/ as a path separator or escape
A single or array of regexp pattern strings that are tested against all tests paths before executing the test. Contrary to
--testPathPattern, it will only run those tests with a path that does not match with the provided regexp expressions.
To pass as an array use escaped parentheses and space delimited regexps such as
\(/node_modules/ /tests/e2e/\). Alternatively, you can omit parentheses by combining regexps into a single regexp like
/node_modules/|/tests/e2e/. These two examples are equivalent.
Lets you specify a custom test runner.
Lets you specify a custom test sequencer. Please refer to the documentation of the corresponding configuration property for details.
Default timeout of a test in milliseconds. Default value: 5000.
-u. Use this flag to re-record every snapshot that fails during this test run. Can be used together with a test suite pattern or with
--testNamePattern to re-record snapshots.
Divert all output to stderr.
Display individual test results with the test suite hierarchy.
-v. Print the version and exit.
Watch files for changes and rerun tests related to changed files. If you want to re-run all tests when a file has changed, use the
--watchAll option instead.
Watch files for changes and rerun all tests when something changes. If you want to re-run only the tests that depend on the changed files, use the
--watchAll=false to explicitly disable the watch mode. Note that in most CI environments, this is automatically handled for you.
Whether to use
watchman for file crawling. Defaults to
true. Disable using